Series 8000

Overview

Multifunction trailers

Show only:
Multifunction trailers list view
close

Turntable Tandem Axle

This two-axle vehicle with turntable has been constructed for day-to-day professional use. Its huge loading volume is made possible by reinforced longitudinal beams to ensure safe transport. The loading height of only 655 mm means you will have no problem loading your cargo onto the trailer. Which size would you prefer? We offer you body dimensions ranging from 5.1 to 6.1 m in length. The payload of over 2 tonnes is sufficient for even very challenging transport requirements. The trailer's long service life is equally impressive: The chassis has been hot-dip galvanised and the drop sides are made from anodised aluminium. What more could you want?
Open product page for Turntable Tandem AxleModel overview

Drehschemel

2-Achser

close

Three Axle

With its drop sides and anodised aluminium profiles, it looks good and offers you a huge amount of loading space. The turntable wheels-in trailer drives safely on three rubber spring axles and special tyres that also ensure a low loading height. Choose between body dimensions from five to eight metres in length. Its payload ranges from 2.3 to 2.67 tonnes. Eight to ten sturdy lashing rings secure your load during transport. The ball bearings fitted in the steering crown make this three-axle vehicle particularly easy to drive and manoeuvre.
Open product page for Three AxleModel overview

Drehschemel

3-Achser

close

Senko

This trailer can even be used to load vehicles with very little road clearance. Simply use the hydraulics to lower the loading platform either using a manual pump or - as an optional extra to make your work even easier - with the help of an electric motor. The lowerable rubber spring axles will provide you with an extremely shallow loading angle. The Senko is also enormously robust. The drop sides made from 3-mm steel plate are strong enough to handle even the heaviest loads. Each of the ten lashing rings has been DEKRA-approved for a tensile load of 800 kg. Naturally, all vehicle components have been hot-dip galvanised.

Elevating trailer

Senko

close

Allcomfort Tandem Axle

It makes each operation as convenient as possible: Simply tilt the hydraulic bridge with a manual pump. Gas springs help you to operate the ramp wall. The low load height of 640 mm (single-axle model) or 650 mm (tandem-axle model) keeps the drive-up angle very low. So that the vehicles can be loaded onto the trailer without effort, a stable cable winch frame with a cable winch is available as an optional extra. The sophisticated chassis system of the MTK Allcomfort ensures particularly smooth road handling.

Allcomfort Tandem Axle

Trailer  in detail