The big brother of the HS 7.5t

Tandem flatbed

HS 10t.

To the models
Increased payload and even more stability

The most important features of the HS 10t models

HS 10t

Easy to use.

  • Steplessly adjustable draw tube
  • 15-pin connector

HS 10t

Secure transport.

  • ABS brakes as per ECE Guidelines
  • Reinforced 12 metric ton gearbox support spool

Additional equipment features

Compressed air brake with release valve, automatic load-dependent ALB brake, connecting lines with couplings in red/yellow, 24 V ABV system with spinal parking brake

 Tow bar with screw drawbar ring Ø 40 mm, galvanised, can be steplessly adjusted via the crank handle 

  • 15-pin connector
  • 24 V lighting system with multi-chamber tail lights. optimally protected, and
LED lateral lights
  • 2 pairs of lashing rings 6 t, set into bridge floor
  • 6 pairs of lashing points 2 t in the outer frame
  • Solid galvanised steel ramps, laterally adjustable, made of galvanised profile gratings (HS 89) and covered with wood (HS 10), pressurised gas ramp lift
  • 2 folding and telescopic supports on the ramps
  • Stable and galvanised welded construction for optimal stability and safety. rigid, load-bearing, galvanised front and side walls
  • Flooring made from 40 mm softwood planks
  • Axle with drum brake, no-maintenance parabolic suspension for optimal power compensation
  • Robust, hot-dip galvanised steel mudguards with anti-spray system, 
    side impact protection, side and rear contour markings
  • 2 wheel chocks with holder
  • Reinforced 12 metric ton gear-supported jack with power and fast gears, 2x support, can be folded and telescoped on 
    the ramps

Optional accessories

Original Humbaur accessories in original Humbaur quality are available from our webshop.

Browse now

Models

  • HS 106020 BS Fräsentransport

    with reinforced base, conveyor support and extended drawbar

    Gross weight:
    11.900 kg
    Load capacity:
    8.560 kg
    Inner length:
    6.000 mm
    Inner width:
    2.010 mm
    Configure
  • HS 106020 BS

    somewhat longer, but with somewhat lower payload

    Gross weight:
    11.900 kg
    Load capacity:
    8.950 kg
    Inner length:
    6.000 mm
    Inner width:
    2.010 mm
    Configure
  • HS 105020 BS

    somewhat shorter, but with higher payload

    Gross weight:
    11.900 kg
    Load capacity:
    9.500 kg
    Inner length:
    5.000 mm
    Inner width:
    2.010 mm
    Configure

Compare models


HS 105020 BS HS 106020 BS HS 106020 BS milling machine transport
Total permissible weight in kg 11,900 11,900 11,900
Overall dimension in mm (LxWxH) 7,090 x 2,550 x 3,090 8,090 x 2,550 x 3,090 8,420 x 2,550 x 3,300
Payload in kg 9,500 8,950 8,560
Load height in mm 705 705 705
Ramp slope in degrees 16 16 15
Tyres in inches 215/75 R17.5 215/75 R17.5 215/75 R17.5

Subject to technical modifications. All dimensions are approximate values and refer to the standard vehicle without accessories. Additional equipment changes both the unladen weight and the payload.

Would you like support in configuring the model you want? 

We would be happy to advise you on the configuration of your personalised trailer from the HS series! 

Arrange a consultation now

Humbaur specialist partners near you

We have more than 500 specialist partners throughout Germany providing sales and service support. Find a Humbaur partner in your area!

Find a dealer now

All information is provided without guarantee. Subject to change without notice. Images may show optional equipment. Accessories are available as an option.