Single axle rear tipper HUK

Handy tipping trailer

for private and commercial applications
i

Chassis and tipping platform are welded and hot-dip galvanised by immersion bath.

i

Galvanised platform floor

i

Drop sides 300 mm, folding on all sides.

i

Manual pump, optional electric hydraulic pump.

i

Pull rod locks

i

Conical stanchions, removable.

i

3-step telescopic cylinder with manual pump.

i

V-groove outer frame with recessed tie-down brackets.

i

Lighting integrated in the underride protection.

i

Automatic jockey wheel

Compact dimensions, high-quality materials - the HUK always gives good service in daily use. Its particular quality characteristic: The sheet steel bridge is made of a single piece of galvanised steel, just like its bigger brothers, the Garant and HTK. Where else would you find this in this class?

Single axle rear tipper HUK in detail:

Chassis and tipping platform are welded and hot-dip galvanised by immersion bath
Galvanised platform floor
Drop sides 300 mm, folding on all sides
Manual pump, optional electric hydraulic pump
Pull rod locks
Conical stanchions, removable
3-step telescopic cylinder with manual pump
V-groove outer frame with recessed tie-down brackets
Lighting integrated in the underride protection
Automatic jockey wheel

Technical data

Rear tipper (single axle)

Trailer Rear tipper (single axle) in detail
Rear tipper (single axle) silhouette sideview
Inner height 300 mmTotal height 950 mm
Inner length 2.300 mmTotal length 3.650 mm
Rear tipper (single axle) silhouette backside
Inner width 1.400 mmTotal width 1.540 mm

Rear tipper (single axle) Standard equipment

  • Chassis and tipping platform welded andhot-dip galvanised
  • Galvanised platform floor (3 mm)
  • Drop-sides 300 mm high, folding down on all sides
  • Pull rod closures
  • Conic corner posts, removable
  • Three-step telescopic cylinder with manual pump
  • Automatic jockey wheel
  • Lighting protected by the underrun protection
  • V-slot external frame with of countersunk lashing points
  • Manual pump

Rear tipper (single axle) Models

Permissible gross weight in kg
1500
1300
1500
1800
Load capacity in kg
1025
900
1100
1310
Body dimensions in mm (LxWxH)
4130 x 1640 x 980
3650 x 1540 x 950
3650 x 1540 x 950
4130 x 1640 x 980
Internal dimensions in mm (LxWxH)
2680 x 1500 x 300
2300 x 1400 x 300
2300 x 1400 x 300
2680 x 1500 x 300
braked
Load height in mm
670
640
640
670
Tyre size in inches
13
13
13
13

HUK 152715

Permissible gross weight in kg
1500
braked
Body dimensions in mm (LxWxH)
4130 x 1640 x 980
Tyre size in inches
13
Internal dimensions in mm (LxWxH)
2680 x 1500 x 300
Load capacity in kg
1025
Load height in mm
670
 
 

HUK 132314

Permissible gross weight in kg
1300
braked
Body dimensions in mm (LxWxH)
3650 x 1540 x 950
Tyre size in inches
13
Internal dimensions in mm (LxWxH)
2300 x 1400 x 300
Load capacity in kg
900
Load height in mm
640
 
 

HUK 152314

Permissible gross weight in kg
1500
braked
Body dimensions in mm (LxWxH)
3650 x 1540 x 950
Tyre size in inches
13
Internal dimensions in mm (LxWxH)
2300 x 1400 x 300
Load capacity in kg
1100
Load height in mm
640
 
 

HUK 182715

Permissible gross weight in kg
1800
braked
Body dimensions in mm (LxWxH)
4130 x 1640 x 980
Tyre size in inches
13
Internal dimensions in mm (LxWxH)
2680 x 1500 x 300
Load capacity in kg
1310
Load height in mm
670
 
 

Images similar; some images show special equipment.